24
Drain pump
The drain pump is maintenance-free. It is only necessary to open the
pump cover if there is a malfunction and water is no longer being
pumped out, e. g. if the pump wheel is blocked.
Please make sure before loading the washing that there are no foreign
bodies in the pockets or caught between the washing. Paperclips, nails,
etc. that may have got into the washing machine with the washing re-
main in the pump housing (foreign body trap that protects the pump
wheel).
1
Warning!
Before opening the pump cover, switch off the washing ma-
chine and remove the mains plug from the socket.
1.
First carry out an emergency drain.
2.
Place a cloth on the floor in front of the drain pump cover.
Residual water runs out.
3.
Unscrew the pump cover in an anti-
clockwise direction and remove it.
4.
Remove foreign bodies and fluff
from the pump housing and from
the pump wheel.
5.
Check whether the pump wheel
right at the back of the pump hous-
ing can turn. (It is normal for the
pumping wheel to turn jerkily.) If
the pumping wheel cannot be
turned, please contact the Customer
Care Department.
6.
Insert the pump cover. Insert the
guides at the sides of the cover into
the guide slots and tighten the cov-
er by turning in a clockwise
direction.
7.
Close off the emergency drain hose
and place it in the support.
8.
Close plinth flap.
