89
Something not working?
Spinning starts late or the
machine does not spin
The unbalance detection
If the laundry is not evenly
device that prevents
distributed inside the drum
excessive vibration during
at the beginning of the
spinning has cut in.
spin cycle, the machine
detects this and tries to
redistribute it more evenly
by means of a few drum
rotations.
Only when the laundry is
more evenly distributed
will the spin cycle be
performed, at a lower speed,
if the laundry is not evenly
distributed.
If, after about 10 minutes,
the laundry is still tangled,
the machine will not spin.
Therefore, if the laundry is
still wet at the end of the
cycle, it is advisable to
redistribute it manually
inside the drum and to
select the spin programme.
Problem
Possible cause
Solution
The machine will not dry or
the laundry is not dry
enough
The water tap is not open
Open the water tap.
(E10)
.
The drain filter is clogged.
Clean the filter.
The drying time or degree of
Select the required function.
dryness has not been selected.
An appropriate drying time
Select the appropriate
has not been chosen.
drying time suitable for the
required degree of drying,
according to the type of
fabric (cottons or synthetics).
There is too much laundry
Reduce the load.
inside the appliance.
132994110gb.qxd 11-04-2002 16:06 Pagina 89
