Starting the programme
1. Check that the water tap is open.
2. Press START/PAUSE to start the programme.
If the Delay Start option has been selected the
programme will start at the end of the count-
down.
If the door light is red and flashing at the start of the programme it
indicates that the door is open. Close the door and press the
START/PAUSE button again.
If the delay start option has been selected
, the machine starts its
countdown, in hours, which will appear on the display. During this
period it is possible to load other laundry, to modify or cancel the
delay time.
• Load other laundry:
press the START/PAUSE button. Open the door.
Load the laundry. Close the door and press the START/PAUSE button
again.
• Modify or cancel the delay time:
press the START/PAUSE button.
Press the DELAY START button until the time required appears on
the display, or
0
h, if you wish to cancel it. Press the START/ PAUSE
button again.
Programme progress display
By selecting the wash programme, the pilot lights corresponding to
the various phases making up the programme come on. After the
machine has started, only the running phase pilot light stays on.
Display
The time to the end of the programme decreases minute
by minute and appears on the display.
At the end of the programme
The machine stops automatically. A zero appears on the display. An
acoustic signal is clearly audible. The END light comes on in the pro-
gramme progress display.
If the light OVERDOSERING (OVERDOSAGE) comes on it indicates that
too much detergent has been used. At the next wash carefully follow
the detergent manufacturer’s instructions. Measure out detergent
according to amount, type, degree of soil of fabrics and water hardness.
78
How to wash
132994110gb.qxd 11-04-2002 16:06 Pagina 78
