AEG L8WEC166R User Manual Download Page 31

Page: 31 / 52

softener with water before introducing
them into the drum; the indicator

MIX

appears and disappears on the display

according to the different programme

phases (the arrows flash alternatively).
If you select the a steam programme, the
steam phase indicator comes on.

12.11 Interrupting a

programme and changing the

options

When the programme is running, you

can change only some options:

1. Touch the Start/Pause button.

The related indicator flashes.

2. Change the options. The given

information in the display changes

accordingly.

3. Touch the Start/Pause button again.

The washing programme continues.

12.12 Cancelling a running

programme

1. Press the On/Off button to cancel the

programme and to deactivate the

appliance.

2. Press the On/Off button again to

activate the appliance.

Now, you can set a new washing

programme.

If the ProSense phase is

already carried out and the

water filling is already

started, the new programme

starts without repeating the

ProSense phase. The water

and the detergent are not

drained out in order to avoid

waste.

12.13 Opening the door -

Adding garments

While a programme or the delay start

operates, the appliance door is locked.

If the temperature and level

of the water in the drum are

too high and/or the drum still

rotates you cannot open the

door.

1. Touch the Start/Pause button.

In the display the related door lock

indicator goes off.

2. Open the appliance door. If

necessary, add or remove the items.

3. Close the door and touch the Start/

Pause button.

The programme or the delay start

continues.

4. The door can be opened when the

programme is complete, or set

spinning or draining programme/

option and than press Start/Pause

button.

12.14 End of the programme

When the programme has finished, the

appliance stops automatically. The

acoustic signals operate (if they are

active).
In the display all washing phase

indicators become steady and the time
area shows .
The indicator of the Start/Pause button

goes off.

The door unlocks and the indicator

goes off.

1. Press the On/Off button to deactivate

the appliance.

After five minutes from the end of the

programme, the energy saving function

automatically deactivates the appliance.

When you activate the

appliance again, the display

show the end of the last

selected programme. Turn

the programme dial to set a

new cycle.

2. Remove the laundry from the

appliance.

3. Make sure that the drum is empty.

4. Keep the door and the detergent

dispenser slightly ajar to prevent

mildew and odours.

5. Close the water tap.

ENGLISH

Summary of Contents for L8WEC166R





















































Search results

Summary of Contents for L8WEC166R

Reviews:

Related manuals for L8WEC166R

Brands by name

Popular brands

AEG L8WEC166R, User Manual

Search results

Summary of Contents for L8WEC166R

Reviews:

Related manuals for L8WEC166R

Brands by name

Popular brands