AEG L8WEC166R User Manual Download Page 14

Page: 14 / 52

The power supply cable must be easily

accessible after installing the appliance.
For any electrical work required to install

this appliance, contact our Authorised

Service Centre.

The manufacturer does not accept any

responsibility for damage or injury

through failure to comply with the above

safety precaution.

6. ACCESSORIES

6.1 Available in

www.aeg.com/shop or from

authorised dealer

Read carefully the instructions supplied

with the accessory.

Only appropriate

accessories approved by

AEG ensure the safety

standards of the appliance. If

unapproved parts are used,

any claims will be

invalidated.

6.2 Fixing plate kit

If you install the appliance on a plinth

that is not an accessory supplied by

AEG, secure the appliance in the fixing

plates.
Read carefully the instructions supplied

with the accessory.

6.3 Pedestal with the drawer

To raise your appliance and make

loading and unloading laundry easier.

The drawer can be used for laundry

storage e.g.: towels, cleaning products

and more.

7. CONTROL PANEL

7.1 Control panel description

Anti-crease

Quick Wash

Start/Pause

Programme

Eco 40-60

Cottons

Synthetics

Delicates

Dry

Wash

Steam

Rinse

Spin/Drain

OKOPower

Outdoor

Wool/Handwash

Auto Drying

Time Drying

Temp.

Spin

Stains/

Prewash

Delay Start

Mode

11 10

www.aeg.com

Summary of Contents for L8WEC166R





















































Search results

Summary of Contents for L8WEC166R

Reviews:

Related manuals for L8WEC166R

Brands by name

Popular brands

AEG L8WEC166R, User Manual

Search results

Summary of Contents for L8WEC166R

Reviews:

Related manuals for L8WEC166R

Brands by name

Popular brands