13. DAILY USE
WARNING!
Refer to Safety chapters.
13.1 Using weight sensors
For a correct use of the
weight sensor, the drum
must be empty when
activating the appliance.
Set the programme
BEFORE you put the
laundry in the drum.
13.2 Before activating the
appliance
1. Make sure that the mains plug is
connected to the mains socket.
2. Make sure that the water tap is open.
13.3 Activating the appliance
and setting a programme
1. Press button Zap./Vyp. for a few
seconds to activate the appliance.
The programme dial is automatically set
on default programme and only the Prání
indicator is on.
The indicator of Start/Pauza button
flashes.
2. Turn the programme knob to the
necessary programme.
The programme indicator comes on.
The display shows the maximum load,
the default temperature, the maximum
spin speed, the indicators of the phases
making up the programme and the
programme duration.
3. If it is necessary, touch the Teplota
button and the Odstřeďování button
to change the water temperature and
the spin speed.
4. If necessary, touch the related
buttons to add some options and/or
to set a delayed start.
The display shows the symbol of the set
option and/or the digit shows the delayed
time.
13.4 Loading the laundry
1. Open the appliance door.
The display shows
.
2. Shake the items before you put them
in the drum. Put the laundry in the
drum, one item at time.
On the display the weight of the laundry
is updated by steps of kg 0.5 and the
programme duration is updated
accordingly. The weight is indicative and
changes with the type of the laundry.
If you put in the drum more
laundry than the maximum
load, the symbol
flashes for a few seconds
and shows the maximum
recommended load.
You can wash your laundry
anyway, but the water and
energy consumption
increase.
To have the best
consumption and washing
performance remove the
exceeding items.
The overload indication is
shown only in programmes
with a maximum load lower
than the appliance maximum
load.
3. Close the door. Make sure that no
laundry stays between the seal and
the door. There is a risk of water
leakage or damage to the laundry.
4. The display shows the percentage of
detergent quantity needed
.
This data is indicative and refers to the
detergent dosage recommended for a
maximum load on the detergent
package.
www.aeg.com
30
