returns, the indicator is on the
display.
Every time you switch the
appliance on, the appliance
takes about 10 seconds to
connect to the network
automatically. When the
indicator stops blinking
the connection is ready.
To switch the wireless connection off,
press and hold the Auto sušení and the
Mód buttons simultaneously for a few
seconds until the first acoustic signal.
Release the buttons.
appears on
the display for 5 seconds.
If you switch the appliance
off and on again, the
wireless connection is
automatically off.
To remove the wireless credentials,
press and hold the Auto sušení and the
Mód buttons simultaneously for 10
seconds until the second acoustic signal:
appears on the display.
10.3 Remote Start
The Remote Start enables you to start a
cycle in remote control.
The Remote Control
activates automatically when
you press the Start/Pauza
button to start the
programme, but it is also
possible to start a washing
programme remotely. This
function is deactivates when
door is open.
When the App is installed and the
wireless connection is complete, you
can activate the Remote Start:
Press and hold the Auto sušení and the
Čas sušení buttons simultaneously for a
few seconds. The indicator appears on
the display and the door is locked. Now it
is possible to start the programme
remotely.
To remove the Remote Start, press and
hold the Auto sušení and the Čas sušení
buttons simultaneously for a few seconds
until the indicator disappears on the
display.
10.4 Over-the-air update
The App may propose an update for your
appliance.
The update is accepted via App only.
If a programme is running, the App
notifies that the update will start at the
end of the programme.
During the update, the appliance shows
in the display.
Do not switch off or unplug the appliance
during update.
The appliance will usable again at the
end of the update, without any
notification about successful update.
If an error occurs, the appliance shows
in the display: just press any
buttons or turn the knob to return to
normal use.
www.aeg.com
28
