AEG L8WBC61S User Manual Download Page 24

Page: 24 / 48

SETTINGS

9.1

Child Lock

With this option you can prevent that the

children play with the control panel.
• To

activate/deactivate

this option,

touch the

and the

buttons

simultaneously until the indicator

comes on/goes off

on the display.

You can activate this option:
• After you touch the Start/Pause

button: all the buttons and the

programme dial are deactivated

(except On/Off button ).

• Before you touch the Start/Pause

button: the appliance cannot start.

The appliance keeps the selection of this

option after you switch it off.

9.2

Acoustic signals

This appliance is provided with different

acoustic signals, that operate when:
• You activate the appliance (special

short tune).

• You deactivate the appliance (special

short tune).

• You touch the buttons (click sound).

• You make a wrong selection (3 short

sounds).

• The programme is completed

(sequence of sounds for about 2

minutes).

• The appliance has a malfunction

(sequence of short sounds for about 5

minutes).

deactivate/activate

the acoustic

signals when the programme is
completed, touch the

and the

buttons simultaneously for about 6

seconds.

If you deactivate the

acoustic signals, they

continue operate when the

appliance has a malfunction.

9.3

Permanent Extra Rinse

With this option you can permanently

have one or two extra rinses when you

set a new programme.

• Simultaneously touch the button

and the button once to add one
extra rinse. appears on the display.

• Simultaneously touch the button

and the button twice to add two
extra rinses. appears on the

display.

• Simultaneously touch the button

and the button three times to

remove extra rinses. The display only
shows

10.

DAILY USE

WARNING!

Refer to Safety chapters.

10.1

Using weight sensors

For a correct use of the

weight sensor, the drum

must be empty when

activating the appliance.

Set the programme BEFORE

you put the laundry in the

drum.

10.2

Before activating the

appliance

Make sure that the mains plug is

connected to the mains socket.

Make sure that the water tap is open.

10.3

Activating the appliance

and setting a programme

Press button On/Off for a few

seconds to activate the appliance.

www.aeg.com

Summary of Contents for L8WBC61S

















































Search results

Summary of Contents for L8WBC61S

Reviews:

Related manuals for L8WBC61S

Brands by name

Popular brands

AEG L8WBC61S, User Manual

Search results

Summary of Contents for L8WBC61S

Reviews:

Related manuals for L8WBC61S

Brands by name

Popular brands