The end of the drain hose
must always be ventilated ,
i.e. the inner diameter of the
drain pipe (min. 38 mm -
min. 1.5") must be larger
than the external diameter
of the drain hose.
4.
If the end of the drain hose looks like
this (see the picture), you can push it
directly into the stand pipe.
5. Without the plastic hose guide, to
a sink spigot
- Put the drain hose in
the spigot and tighten it with a
clamp. Refer to the illustration.
Make sure that the drain
hose makes a loop to
prevent particles going into
the appliance from the sink.
6.
Position the hose
directly to a built-
in drain pipe in the room wall
and
tighten it with a clamp.
ENGLISH
11
Summary of Contents for L8WBC61S
Page 1: ...USER MANUAL EN User Manual Washer Dryer L8WBC61S ...
Page 45: ...ENGLISH 45 ...
Page 46: ...www aeg com 46 ...
Page 47: ...ENGLISH 47 ...