manualshive.com logo in svg

AEG L8FEC962Q, User Manual, Page: 14 / 56

Share
Download
AEG L8FEC962Q User Manual Download Page 14

5

Opc. - Skipping
phase touch
button

By touching this button you can set:
• Aclarado/Enxag. at first touch. The washing programme starts

from the rinsing phase by skipping the washing phase.

All set options (except permanent extra rinse)

are deselected automatically.

• Centrif. at second touch. The appliance skips washing and rins-

ing phase.

• Drenar. at third touch. The appliance performs the draining

phase only.

At firth touch, the appliance proposes the de-

fault setting of the washing programme again.

6

Inicio/Pausa
touch button

Touch this button to start, pause the appliance or interrupt a run-
ning programme.

7

Extra Rápido
touch button

With this option you can decrease the programme duration:
• If your laundry is normally or lightly soiled, it may be advisable

to shorten the washing programme. Touch this button 

once

 to

decrease the duration.

• In case of smaller load, touch this button 

twice

 to set an extra

quick programme.

The display shows the indicator 

.

This option can also be used to shorten the Vapor

programme duration.

www.aeg.com

14

Summary of Contents for L8FEC962Q

























































Reviews:

No comments