background image

3. Add a small quantity of powder

detergent into the empty drum, in

order to rinse out any left residues.

Occasionally, at the end of a

cycle the display may show
the icon  : this is a

recommendation to perform

the “drum cleaning”. Once

the drum cleaning has been

performed, the icon

disappears.

13.8 Cleaning the detergent

dispenser

To prevent possible deposits of dried

detergent or clotted fabric softener

and/or formation of mould in the

detergent dispenser drawer, once in a

while carry out the following cleaning

procedure:

1. Open the drawer. Press the catch

downwards as indicated in the

picture and pull it out.

2. Remove the top part of the additive

compartment to aid cleaning and

flush it out under running warm

water, to remove any traces of

accumulated detergent. After

cleaning, put the top part back into

position.

3. Make sure that all detergent residue

is removed from the upper and lower

part of the recess. Use a small brush

to clean the recess.

4. Insert the detergent drawer into the

guide rails and close it. Run the

rinsing programme without any

clothes in the drum.

13.9 Cleaning the drain pump

WARNING!

Disconnect the mains plug

from the mains socket.

www.aeg.com

36

Summary of Contents for L8FEC842BI

















































Reviews: