AEG L82470BI, User Manual, Page: 30 / 36

To a sink spigot
• Refer to the illustration. Put the drain hose
in the spigot and tighten it with a clip.
• Make sure that the drain hose makes a
loop to prevent particles going into the
appliance from the sink.
To a wall-pipe
• Directly to a built-in drain pipe in the room
wall and tighten it with a clip.
You can extend the drain hose to maximum 400 cm. Contact the service
centre for the other drain hose and the extension.
14.5 Building in
600 mm
555 mm
596 mm
170 mm
75 mm
100 mm
60 mm
min.
820 mm
min.
560 mm
818 mm
This appliance has been designed to be built
into the kitchen furniture. The recess should
have the dimensions shown in this picture.
14.6 Preparation and assembly of the door
The appliance is originally pre set for the
assembly of a door opening from right to left.
www.aeg.com 30