AEG L82470BI, User Manual, Page: 16 / 36

10.5 Filling the detergent and
additives
MAX
Compartment for prewash phase,
soak programme or stain remover.
Compartment for washing phase.
Compartment for liquid additives
(fabric conditioner, starch).
Maximum level for quantity of liquid
additives.
Always follow the
instructions that you find on
the packaging of the
detergent products.
10.6
Starting a programme
with the delay start
Set this option before you pressStart/
Pause button.
• Press Delay Start button repeatedly to
set the desired delay.
The symbol appears on the display.
The wash programme can be delayed
from 30 min. - 60 min. - 90 min., 2 hours
and then by 1 hour up to a maximum of
20 hours.
The set delay time value appears on the
display for about 3 seconds, then the
duration of the programme appears
again.
Before you pressStart/Pause button you
can modify or cancel the delay time at
any point.
The door will be locked throughout the
delay time. If you wish to add laundry to
the appliance during the delay time,
press the Start/Pause button to pause
the appliance. When the indicator
goes off , the door can be opened. Add
the laundry, close the door and press
Start/Pause button again.
Setting the delayed start
• Set the programme and the required
options.
• Set the delay start.
• Press Start/Pause button: the
appliance starts its hourly countdown.
The programme starts after the
selected delay has expired.
Cancelling the delayed start
• Press Start/Pause button to pause the
appliance;
• Press Delay Start button until the
symbol ’ is displayed;
• Press Start/Pause button again to
start the programme.
The selected delay can be
changed only after you have
set the washing programme
again.
The Delay Start cannot be set with the
Drain programme.
10.7 Altering an option or a
running programme
It is possible to change some options
before the programme operate. Before
you make any change, you must press
Start/Pause button to pause the
appliance.
Changing a running programme is
possible only by resetting it .
Turn the programme dial to Off and then
to the new programme position.
Press Start/Pause button again to start
the new programme. The washing water
in the tub will not be drained.
10.8 Interrupting a
programme
Press Start/Pause button to interrupt a
programme which is running, the
corresponding indicator starts flashing.
Press Start/Pause button again to restart
the programme.
www.aeg.com 16