1
2
2.
Place a suitable bowl below the drain
pump access to collect the water that
flows out.
3.
Open the chute downwards. Always
keep a rag nearby to dry up any
water spillages when removing the
filter.
4.
Turn the filter 180 degrees in anti-
clockwise direction to open it,
without removing. Let the water flow
out.
5.
When the bowl is full of water, turn
the filter back and empty the
container.
6.
Repeat the steps 4 and 5 until the
water stops to flow out.
7.
Turn the filter anti-clockwise to
remove it.
1
2
8.
If it is necessary, remove fluff and
objects from the filter recess.
9.
Make sure that the impeller of the
pump can rotate. If it does not
rotate, contact the Authorised
Service Centre.
10.
Clean the filter under the water tap.
11.
Put the filter back into the special
guides by turning it clockwise. Make
sure that you tighten the filter
correctly to prevent leakages.
www.aeg.com
36
Summary of Contents for L7WEE861
Page 1: ...USER MANUAL EN User Manual Washer Dryer L7WEE861 ...
Page 45: ...ENGLISH 45 ...
Page 46: ...www aeg com 46 ...
Page 47: ...ENGLISH 47 ...
