AEG L7WEE861, User Manual

Page: 23 / 48

8. BEFORE FIRST USE
During installation or before
first use you may observe
some water in the appliance.
This is a residual water left in
the appliance after a full
functional test in the factory
to ensure the appliance is
delivered to customers in
perfect working order and is
no cause for concern.
1. Make sure that all transit bolts have
been removed from the appliance.
2. Make sure that the electrical power is
available and the water tap is open.
3.
Pour 2 litres of water into the
detergent compartment marked by
.
This action activates the drain system.
4. Pour a small quantity of detergent
into the compartment marked by
.
5. Set and start a programme for cotton
at the highest temperature without
any laundry in the drum.
This removes all possible dirt from the
drum and the tub.
9. SETTINGS
9.1 Child Lock
With this option you can prevent that the
children play with the control panel.
• To
activate/deactivate this option,
touch the Manchas/Pre-Lav. and the
Centrif. buttons simultaneously until
the indicator
comes on/goes off
on the display.
You can activate this option:
• After you touch the Inicio/Pausa
button: all the buttons and the
programme dial are deactivated
(except On/Off button ).
• Before you touch the Inicio/Pausa
button: the appliance cannot start.
The appliance keeps the selection of this
option after you switch it off.
9.2
Acoustic signals
This appliance is provided with different
acoustic signals, that operate when:
• You activate the appliance (special
short tune).
• You deactivate the appliance (special
short tune).
• You touch the buttons (click sound).
• You make a wrong selection (3 short
sounds).
• The programme is completed
(sequence of sounds for about 2
minutes).
• The appliance has a malfunction
(sequence of short sounds for about 5
minutes).
To
deactivate/activate
the acoustic
signals when the programme is
completed, touch the Manchas/Pre-Lav.
and the Inicio diferido buttons
simultaneously for about 6 seconds.
If you deactivate the
acoustic signals, they
continue operate when the
appliance has a malfunction.
9.3 Permanent Extra Rinse
With this option you can permanently
have one or two extra rinses when you
set a new programme.
• Simultaneously touch the Temp.
button and the Centrif. button once
to add one extra rinse. appears on
the display.
• Simultaneously touch the Temp.
button and the Centrif. button twice
to add two extra rinses. appears on
the display.
• Simultaneously touch the Temp.
button and the Centrif. button three
times to remove extra rinses. The
display only shows
.
ENGLISH 23