AEG L7TDR722E, User Manual

Page: 19 / 40

This option can increase
the programme duration
and is not available with a
temperature lower than
40 °C.
• Prélavage
Use this option to add a prewash
phase at 30 °C before the washing
phase.
This option is recommended for
heavily soiled laundry, especially if
containing sand, dust , mud and other
solid particles.
This option can increase
the programme duration.
The corresponding indicator above
the touch button illuminates.
8.8 Rinçage
With this button you can select one of the
following options:
• Rinçage Plus option
This option adds a few rinses
according to the selected washing
programme.
Use this option for persons allergic to
detergent residues and in areas
where the water is soft.
This option increases
slightly the programme
duration.
• Skipping wash phase - Rinçage
option
The appliance performs only the
rinsing phase , the spinning and the
draining phases of the selected
programme.
The corresponding indicator above the
touch button illuminates.
8.9 Vapeur Plus
This option adds a steam phase followed
by a short anti-crease phase at the end
of the washing programme. The steam
phase reduces fabric creasing and
facilitates the fabric ironing.
The indicator flashes on the display
during steam phase.
The drum performs smooth movements
for about 30 minutes. The duration of the
steam phase changes accordingly to the
selection. When Plus Steam option is set
the programme ends up with an
anticrease phase during which the drum
is occasionally rotated to prevent
wrinkling. The display shows the
indicator is steady on and the
indicator
starts flashing. Départ/
Pause button is lit as well. At the end of
the anticrease phase the drum definitely
stops, the indicator goes off, the door
unlocks. User at any moment can
terminate the anticrease phase by:
• pressing the Marche/Arrêt button for a
few seconds to activate or deactivate
the appliance;
• turning the selector knob to another
position.
A small laundry load helps to
reach better results.
8.10 Départ Différé
With this option you can delay the start of
a programme in a more convenient time.
Touch the button repeatedly to set the
required delay. The time increases by
steps of 30 minutes up to 90' and from 2
hours up to 20 h.
After touching the Départ/Pause button,
the display shows the indicator and
the selected delay time and the
appliance begins the countdown.
8.11 Départ/Pause
Touch the Départ/Pause button to start,
pause the appliance or interrupt a
running programme.
ENGLISH 19