background image

Problem

Possible solution

The appliance makes an
unusual noise and vi-
brates.

• Make sure the levelling of the appliance is correct. Refer to

"Installation instruction".

• Make sure that the packaging and/or the transit bolts are

removed. Refer to "Installation instruction".

• Add more laundry in the drum. The load may be too small.

The programme duration
increases or decreases
during programme exe-
cution.

• The ProSense System is able to adjust the programme du-

ration according to the type and the laundry load size. Re-
fer to "The ProSense System load detection" in "Daily Use"
chapter.

The washing results are
not satisfactory.

• Increase the detergent quantity or use a different deter-

gent.

• Use special products to remove the stubborn stains before

you wash the laundry.

• Make sure that you set the correct temperature.
• Decrease the laundry load.

Too much foam in the
drum during the washing
cycle.

• Reduce the quantity of detergent.

After the washing cycle,
there are some deter-
gent residues in the dis-
penser drawer.

• Make sure that the flap is in the correct position (UP for

powder detergent - DOWN for liquid detergent).

• Make sure you have used the detergent dispenser accord-

ing the indications given in this user manual.

After the check, activate the appliance. The programme continues from the point of
interruption.
If the problem occurs again, contact the Authorised Service Centre.
If the display shows other alarm codes, deactivate and activate the appliance. If the
problem continues, contact the Authorised Service Centre.

13.3 

Emergency door opening

In case of power failure or functioning

failure the appliance door remains

locked. The washing programme

continues when the power is restored. If

the door remains locked in case of

failure, it is possible to open it using the

emergency unlock function.
Before opening the door:

CAUTION!

Risk of burns! Make sure

that the water

temperature is not too

high and the laundry is not

hot. If necessary, wait until

they cool down.

CAUTION!

Risk of injury! Make sure

that the drum is not

rotating. If necessary, wait

until the drum stops

rotating.

Make sure that the water

level inside the drum is not

too high. If necessary,

proceed with an

emergency drain (refer to

«Emergency drain» in

«Care and cleaning»

chapter).

To open the door, proceed as follows:

1.

Press the On/Off button to switch the

appliance off.

www.aeg.com

40

Summary of Contents for L7FEC842BI

















































Reviews: