manualshive.com logo in svg

AEG L6FQW842G, User Manual

Share
Download
AEG L6FQW842G User Manual Download Page 23

blinking detergent tank 

 and

softener tank   indicators on the

right in the display.

4.

Touch related tank buttons to toggle

function off and on. The display

shows OFF when a tank is disabled

or shows tank indicator when it is

enabled.

5.

To set basic dosage touch related

tank buttons until default dosage

laundry product and two arrows on

bottom of display appear. Touch the

Temp. button repeatedly to adjust

the dosage upwards and the Spin

button to adjusts it downwards.

Minimum step is 1 ml.

6.

After about 10 seconds the display

returns to the programme

information screen or hold pressed

the Temp. and the Spin buttons

again to exit immediately.

7.5 

Filling the detergent and

additives on AutoDose system

Please read "Detergents

and other treatments" in

"Hints and tips" chapter.

We recommend that you do

not exceed the maximum
indicated level (

).

1.

Open the detergent dispenser.

2.

Lift up the AutoDose cover lid.

3.

Gently pour only liquid detergent in
the AutoDose detergent tank 

.

Fill up to the maximum indicated
level 

.

ENGLISH

23

Summary of Contents for L6FQW842G

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands