manualshive.com logo in svg

AEG L6FQW842G, User Manual

Share
Download
AEG L6FQW842G User Manual Download Page 15

8

Remote/Delay
Start touch
button

Press this button repeatedly to activate one of the two options or
both.
The relevant indicator comes on in the display.
•

 

Remote

Select this option to connect appliance with App.
Touch this button, the display shows the indicator 

 blink-

ing for a few seconds.
After touching the Start/Pause button, the display shows the
indicator 

 and the Remote is confirmed.

When touching the Start/Pause button after
the indicator 

 stops blinking, the Remote

Start is not activated, but the set programme

starts.

•

 

Delay Start

With this option you can delay the start of a programme in a
more convenient time.
Touch the button repeatedly to set the required delay. The
time increases by steps of 30 minutes up to 90' and from 2
hours up to 20 h.
After touching the Start/Pause button, the display shows the
indicator 

 and the selected delay time and the appliance

begins the countdown.

9

Time Save
touch button

With this option you can decrease the programme duration:
•

 

Daily

If your laundry is normally or lightly soiled, it may be advisable
to shorten the washing programme. Touch this button 

once

 to

decrease the duration.

•

 

Super Quick

In case of smaller load, touch this button 

twice

 to set an extra

quick programme.

ENGLISH

15

Summary of Contents for L6FQW842G

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands