without removing. Let the water flow
out.
5.
When the bowl is full of water, turn
the filter back and empty the
container.
6.
Repeat the steps 4 and 5 until the
water stops to flows out.
7.
Turn the filter anti-clockwise to
remove it.
1
2
8.
If it is necessary, remove fluff and
objects from the filter recess.
9.
Make sure that the impeller of the
pump can rotate. If it does not
rotate, contact the Authorised
Service Centre.
10.
Clean the filter under the water tap.
11.
Put the filter back into the special
guides by turning it clockwise. Make
sure that you tighten the filter
correctly to prevent leakages.
12.
Close the pump cover.
2
1
12.8
Cleaning the inlet hose
and the valve filter
It is recommended to clean both the
filters of the inlet hose and valve
occasionally to remove any deposit,
collected over the time:
1.
Remove the inlet hose from the tap
and clean the filter.
ENGLISH
25
