3.
B
4.
• Position
A
for powder detergent (factory setting).
• Position
B
for liquid detergent.
When you use the liquid detergent:
• Do not use gelatinous or thick liquid detergents.
• Do not put more liquid then the maximum level.
• Do not set the prewash phase.
• Do not set the delay start.
10.6
Starting a programme
without the delay start
Touch button Start/Pause to start the
programme.
The relevant indicator stops to flash and
stays on with red colour.
The programme starts, the door is
locked. The display show the indicator
.
The drain pump can operate
for a short time when the
appliance fills water.
10.7
Behaviour of the
appliance
After approximately 15
minutes from the start of the
programme:
• The appliance adjusts
automatically the cycle
time to the laundry you
have put in the drum to
have perfect washing
results in the minimum
necessary time.
• The display shows the
new time value.
10.8
Starting a programme
with the delay start
1.
Touch button Delay Start again and
again to set the desired delayed
start.
The display show the expected end of
the programme.
2.
Touch button Start/Pause.
The appliance starts the countdown of
the delay start.
When the countdown is completed, the
programme starts automatically.
Before you touch button
Start/Pause to start the
appliance, you can cancel or
change the set of the delay
start.
10.9
Cancelling the delay start
1.
Touch button Start/Pause. The
related indicator flashes.
2.
Touch button Delay Start again and
again until the display tells that there
is no delay start.
3.
Touch button Start/Pause. The
programme starts.
ENGLISH
21
