If you put in the drum more
laundry than the maximum
load, the text bar tells that
you have put more than the
maximum load. You can
wash your laundry but the
water and energy
consumption increase.
Remove some items to have
the best consumption and
washing performance
The overload indication is
available only for
programmes with a
maximum load lower than
the appliance maximum
load.
3.
Close the door.
The text bar tells the percentage of
detergent to use.
This data is indicative and refers to the
detergent quantity for a maximum load
that the manufacturer recommends.
4.
Make sure that no laundry stays
between the seal and the door.
There is a risk of water leakage or
damage to the laundry.
10.5
Filling the detergent and
additives
Compartment for prewash phase
an soak programme.
Compartment for washing phase.
Compartment for liquid additives
(fabric conditioner, starch).
Maximum level for quantity of
liquid additives.
Compartment for stain remover.
Flap for powder or liquid
detergent.
Always follow the
instructions that you find on
the packaging of the
detergent products.
10.6
Check the position of the
flap
1.
Pull out the detergent dispenser until
it stops.
2.
Press the lever down to remove the
dispenser.
1
2
ENGLISH
19
