The buzzer sounds and the display shows
that the programme is saved.
Set a memorised programme:
Touch
the button where you memorised the
programme you want to set.
The programme indicator comes on and
the display shows all the information.
To cancel a memorised
programme you can only
memorise a new
programme.
7.4
Start/Pauze - Départ/Pause
Touch button Start/Pauze - Départ/Pause
to start or interrupt a programme.
7.5
Startuitstel - Départ
Différé
Touch button Startuitstel - Départ Différé
to delay the start of a programme from
30 minutes to 20 hours.
7.6
Tijd Besparen - Gain de
Temps
Touch button Tijd Besparen - Gain de
Temps to decrease the programme time.
You can select:
• SHORTENED DURATION: to wash
items with daily soil.
• EXTRA QUICK: to wash quickly items
with almost no soil.
Some programmes accept
only one of these functions.
7.7
Extra Spoelen - Rinçage+
Touch button Extra Spoelen - Rinçage+
to add rinsing phases to a programme.
Use this function for persons allergic to
detergents and in areas where the water
is soft.
7.8
Vlekken - Taches/Voorwas
- Prélavage
Touch this button to set one of the
following functions:
•
Prewash
Use this function for heavy soil. The
appliance adds a prewash phase to
the main wash. The programme
duration increases.
•
Soak
Use this function for heavy soil. The
appliance soaks the laundry at 30°C
for about half an hour before to wash.
•
Stains
Use this function for laundry with hard
stains to remove. When you set this
function, put the stain remover into
compartment .
The programme duration
increases. This function is
not available with a
temperature lower than
40° C.
7.9
T./min.
Touch button T./min. to:
• Decrease the maximum speed of the
spin phase of the programme.
The display shows only
the spin speeds available
for the set programme.
• Deactivate the spin phase ( 'No spin'
function).
• Activate the
Rinse Hold
function.
Set this function to prevent fabric
creases. The appliance does not drain
the water when the programme is
completed.
7.10
Temp.°C
Touch this button to change the default
temperature.
Symbols
and
= cold water
www.aeg.com
16
