If the temperature and level of the water in the drum are too high, the door lock symbol
stays on and you cannot open the door. To open the door do the steps that follow:
1. Deactivate the appliance.
2. Wait for some minutes.
3. Make sure that no water is in the drum.
If you deactivate the appliance, it is necessary to set the programme again.
AT THE END OF PROGRAMME
• The appliance stops automatically.
• The acoustic signals operate.
• In the display comes on.
• The indicator of the Start/Pause button
4
goes off.
• The door lock symbol goes off.
• Press button
1
to deactivate the appliance. After five minutes from the end of the pro-
gramme, the energy saving function automatically deactivates the appliance.
When you activate the appliance again, the display show the end of the last set pro-
gramme. Turn the programme knob to set a new cycle.
• Remove the laundry from the appliance. Make sure that the drum is empty.
• Keep the door ajar, to prevent mildew and odours.
• Close the water tap.
The washing programme is completed, but there is water in the drum:
– The drum turns regularly to prevent the creases in the laundry.
– The door stays locked.
– You must drain the water to open the door.
To drain the water:
1. If necessary, decrease the spin speed.
2. Press the Start/Pause button
4
. The appliance drain the water and spin.
3. When the programme is completed and the door lock symbol goes off, you can open
the door
4. Deactivate the appliance.
The appliance drain and spin automatically after approximately 18 hours.
HELPFUL HINTS AND TIPS
The laundry load
• Divide the laundry in: white, coloured, synthetics, delicates and wool.
• Obey the washing instructions that are on the laundry care labels.
20
At the end of programme
