Operating Instructions
23
Add Washing Detergent/Care Agent
3
Refer to the information on washing detergents and care agents, see
section ”Washing Detergents and Care Agents”.
0
1.
Open the washing detergent drawer:
grip inside the flap on the drawer at
the bottom (1) and pull out the drawer
as far as it will go (2).
2.
Fill with washing detergent/
care agent
3.
Push the drawer fully in.
3
If using liquid detergent / tablets
Add liquid detergent / tablets in the quantity recommended by the
washing detergent manufacturer. Add liquid detergent with dosage
containers provided by the detergent manufacturer.
Compartment for in-wash stain
treatment
Compartment for main washing
powder
(If you use water softener and need the
right compartment for the pre-wash/
soaking agent, add the water softener
to the main washing detergent in the
left compartment.)
Compartment for liquid care agent
(Conditioner, finisher, starch)
Attention!
Do not fill the compartment above
the MAX mark. If necessary, dilute viscous agent
up to the MAX mark, and dissolve powder starch.
Note:
It is normal for a small amount of water
to be left in the compartment for liquid care agent;
this will not affect the wash results.
Compartment for pre-wash agent/soaking agent
(only for additonal programs PRE WASH and SOAKING
or for water softener
