English
24
If the registration was done successfully, a short beep sound
will be heard from the headphones. The indicator light will
flash twice every 4 seconds. If possible, adjust the volume of
the player to a suitable listening volume.
NOTE:
• Depending on the device manufacturer, you need to
perform the registration (PAIRING) again to connect the
devices.
• The Bluetooth compatibility cannot be ensured for
devices (e.g. mobile phones) getting released in the
future.
• To ensure an optimal connection, make sure that the
battery of your player is completely charged.
• Some of the mobile phone brands have an energy-sav
-
ing mode. Deactivate the energy-saving mode as it can
otherwise result in problems during the data transfer
through Bluetooth.
• To be able to transfer audio data, Bluetooth needs to
stay activated in your player. Observe the operation
manual of your player.
• If there is no Bluetooth connection, the indicator light
will flash once every 4 seconds.
Operation
The device is equipped with multi functional buttons. For
different functions press the respective button briefly or press
and hold.
ON/OFF (2)
• Press and hold the button approx. 4 seconds to turn the
player on. A beep is emitted from the headphones and
the indicator light (1) flashes red.
NOTE: Automatic connection
If supported by your player (e.g. mobile phone), the de-
vices will be connected automatically. The prerequisite
for this is:
• The devices were already connected with each
other.
• Bluetooth is activated in your player.
• Press and hold the button again approx. 4 seconds to
turn the player off. The devices are separated. The indica-
tor light (1) lights up red for a short time and then goes
out.
NOTE:
Turn off the headphones when you are not using them
to conserve the battery.
/
II Pause (3)
• Press the multifunction button in order to interrupt the
playback.
• Press the multifunction button again in order to continue
the playback.
NOTE:
Depending on the device manufacturers, models, and
software versions you need to start the music playback in
your player.
Adjust Volume (3)
Keep the multifunction button pressed in the “
V
I
” and/
or “
I
V
” direction in order to adjust the volume. Release
the button if you have set the desired volume.
WARNING:
Listening to music at high volume can damage your hear-
ing.
NOTE:
• If the maximum volume on the headphones has been
reached, a beeping sound will be heard.
• Increase the volume on your player.
Select Music (3)
• Press the multifunction button for a short time in the
“
I
V
” direction in order to select the next track.
• When the multifunction button is pressed for a short time
in the “
V
I
” direction, the current track is played back
from the start. Press the multifunction button again for a
short time in the “
V
I
” direction in order to select the
previous track.
NOTE:
Your player must support this function.
Accept/ terminate a conversation
• Push the button ON/OFF (2) to accept an incoming call.
• To end the conversation, push the button one more time.
NOTE:
During an incoming telephone call, the music playback will
stop. After terminating the conversation, the music piece
will continue to be played back.
Reject the call
In order to reject an incoming call, keep the ON/OFF button
(2) pressed for approx. 3 seconds. A confirmation sound can
be heard (emitted from the headphones).
NOTE:
Your mobile phone must support this function.
Calling the last dialed number
Keep the ON/OFF button (2) pressed for approx. 2 seconds.
A confirmation sound can be heard (emitted from the head-
phones). The number is called that you last called with your
mobile.
