Heat setting
Use to:
Time
(min)
Hints
Boil large quantities of water. PowerBoost is activated.
8.5 Hints and Tips for the
Food Sensor
For functions such as
Assisted Cooking and Sous
Vide, you can use the Food
Sensor on the left side of the
hob only. With the
Thermometer function you
can use the Food Sensor
also on the right side of the
hob.
To ensure the best connection between
the Food Sensor and the hob:
For liquids
• Immerse the Food Sensor in the
liquid, within the recommended
immersion range. The minimum
marked level has to be covered.
• Place the Food Sensor on the rim of
the pot. Keep it in the vertical
position. The handle of the Food
Sensor should always be outside of
the pot or pan.
• If you want to use the Food Sensor on
the left side of the hob, ensure that it
is near the centre of the hob, at 1 - 3
o'clock position. If you want to use it
on the right (with the Thermometer
function), make sure it is placed at 9 -
11 o'clock position. Refer to the
illustrations below.
You can move the Food Sensor along
the rim of the pot if the connection
fails to establish.
• You can partially cover the pot with a
lid.
• If you use the left front cooking zone,
do not place any large pots on the left
rear one. Large pots on the left rear
cooking zone may block the signal.
Move the large pot to the right rear
cooking zone.
For solid foods (core temperature
measurement)
• Insert the Food Sensor across the
thickest part of the food, up to the
minimum marked level. The
measurement point should be in the
www.aeg.com
22
