Touch to activate the function.
comes on. The heat setting is lowered
to 1.
To deactivate the function touch .
The function stops PowerBoost. The
highest heat setting reactivates when you
touch again.
7.13
Timer
+STOP
Count Down Timer
Use this function to specify how long a
cooking zone should operate during a
single cooking session.
You can set the function for each
cooking zone separately.
1.
Set the heat setting for the
appropriate cooking zone first and
then set the function.
2.
Touch the zone symbol.
3.
Touch .
The timer menu window appears on the
display.
4.
Check to activate the function.
The symbols change to
+STOP
.
5.
Slide your finger to the left or right to
select the desired time (e.g. hours
and/or minutes).
6.
Touch OK to confirm your selection.
You can also choose to cancel your
selection.
When the time comes to an end, a signal
sounds and blinks. Touch to stop
the signal.
To deactivate the function set the heat
setting to
0
. Alternatively, touch
+STOP
to
the left of the timer value, touch next
to it and confirm your choice when a
pop-up window appears.
Minute Minder
You can use this function when the hob is
activated but the cooking zones do not
operate.
The function has no effect on the
operation of the cooking zones.
1.
Select any cooking zone.
The relevant slider appears on the
display.
2.
Touch .
The timer menu window appears on the
display.
3.
Slide your finger to the left or right to
select the desired time (e.g. hours
and minutes).
4.
Touch OK to confirm your selection.
You can also choose to cancel your
selection.
When the time comes to an end, a signal
sounds and blinks. Touch to stop
the signal.
To deactivate the function touch to
the left of the timer value, touch next
to it and confirm your choice when a
pop-up window appears.
Stopwatch
The function automatically starts
counting immediately after you activate a
cooking zone. You can use this function
to monitor how long it operates.
1.
Touch
to access the Menu.
2.
Scroll the Menu to select Settings >
Stopwatch.
3.
Touch the switch to turn the function
on / off.
The function does not stop when you lift
the pot. To reset the function and start it
again manually touch , select Reset
from the pop-up window. The function
starts counting from
0
. To Pause the
function for one cooking session touch
and select Pause from the pop-up
window. Select Start to continue
counting.
7.14
Lock
You can lock the control panel while the
hob operates. It prevents an accidental
change of the heat setting.
Set the heat setting first.
Touch to activate the function.
To deactivate the function, touch for 3
seconds.
www.aeg.com
18
