AEG IAE84431FB, User Manual

Page: 19 / 24

Problem Possible cause Remedy
The hob deactivates. You put something on the
sensor field
.
Remove the object from the
sensor field.
Residual heat indicator does
not come on. The zone is not hot because
it operated only for a short
time or the sensor is dam-
aged. If the zone operated suffi-
ciently long to be hot, speak
to an Authorised Service
Centre.
Hob²Hood does not work. You covered the control
panel. Remove the object from the
control panel.
You use a very tall pot which
blocks the signal. Use a smaller pot, change
the cooking zone or operate
the hood manually.
Automatic Heat Up does not
operate. The zone is hot. Let the zone become suffi-
ciently cool.
The highest heat setting is
set. The highest heat setting has
the same power as the func-
tion.
The heat setting changes
between two levels. Power management oper-
ates. Refer to "Daily use".
The sensor fields become
hot. The cookware is too large or
you put it too near to the
controls. Put large cookware on the
rear zones, if possible.
There is no sound when you
touch the panel sensor
fields. The sounds are deactivated. Activate the sounds. Refer to
"Daily use".
comes on.
Child Safety Device or Lock
operates. Refer to "Daily use".
comes on.
There is no cookware on the
zone. Put cookware on the zone.
The cookware is unsuitable. Use suitable cookware. Refer
to "Hints and tips".
The diameter of the bottom
of the cookware is too small
for the zone. Use cookware with correct
dimensions. Refer to "Tech-
nical data".
ENGLISH 19