background image

Problem

Possible cause and remedy

 comes on

• No cookware on the cooking zone. Put cookware on the cook

-

ing zone.

• Not correct cookware. Use the correct cookware.

• The diameter of the bottom of the cookware is too small for

the cooking zone. Move cookware to a smaller cooking zone.

 and number come on.

There is an error in the appliance.

Disconnect the appliance from the electrical supply for some

time. Disconnect the fuse from the electrical system of the house.
Connect again. If   comes on again, speak to the after sales

service.

 comes on

There is an error in the appliance, because a cookware boils dry

or you use not correct cookware. Overheating protection for the

cooking zone operates. The automatic switch-off operates.

Switch off the appliance. Remove the hot cookware. After ap

-

proximately 30 seconds switch on the cooking zone again.

 should disappear, residual heat indicator can stay. Cool

down the cookware and check it with the section Cookware for

the induction cooking zone.

There is no signal when you

touch panel keys

The signals are off.

Switch on the signals.

If you tried the above solutions and cannot repair the problem, speak to your dealer or the

Customer Care Department. Give the data from the rating plate, three-digit-letter code for

the glass ceramic (it is in the corner of the cooking surface) and an error message that

comes on.

If you operated the appliance incorrectly, the servicing by a customer service technician or

dealer will not be free of charge, even during the warranty period. The instructions about

the customer service and conditions of guarantee are in the guarantee booklet.

Environment concerns

The symbol     on the product or on its packaging indicates that this product may not be

treated as household waste. Instead it should be taken to the appropriate collection point

for the recycling of electrical and electronic equipment. By ensuring this product is disposed

of correctly, you will help prevent potential negative consequences for the environment

and human health, which could otherwise be caused by inappropriate waste handling of

this product. For more detailed information about recycling of this product, please contact

your local council, your household waste disposal service or the shop where you purchased

the product.

Packaging material

The packaging materials are friendly to the environment and can be recycled. The plastic

components are identified by marking: >PE<,>PS<, etc. Discard the packaging materials as

household waste at the waste disposal facilities in your municipality.

14

Environment concerns

Summary of Contents for HK854220XB


















Reviews: