cable type: H05BB-F Tmax 90°C.
Speak to your local Service Centre.
8.4
Attaching the seal to the
rabbet
1.
Clean the rabbets in the worktop.
2.
Cut the supplied seal stripe into 4
stripes. The stripes must have the
same length as the rabbets.
3.
Cut the ends of the stripes at an
angle of 45°. They should fit in the
corners of the rabbets accurately.
4.
Attach the stripes to the rabbets. Do
not extend the stripes. Do not bond
ends of stripes one over another.
After you assemble the hob, seal the
remaining gap between glass ceramic
and the worktop with silicone. Make sure
the silicone does not get under the glass
ceramic.
8.5
Assembly
min.
50mm
min.
500mm
774+1mm
514+1mm
490+1mm
min. 55mm
750+1mm
R10mm
R5mm
12mm
7mm
min.
28 mm
min.
12 mm
min.
20 mm
www.aeg.com
14
Summary of Contents for HK854080IB
Page 1: ...EN User Manual Hob HK854080IB ...
Page 17: ...ENGLISH 17 ...
Page 18: ...www aeg com 18 ...
Page 19: ...ENGLISH 19 ...