6.3
Filling the rinse aid dispenser
A
B
D
C
M AX
1
2
3
4
+
-
A
B
D
C
1.
Press the release button (
D
) to open
the lid (
C
).
2.
Fill the rinse aid dispenser (
A
), no
more than the mark 'max'.
3.
Remove the spilled rinse aid with an
absorbent cloth to prevent too much
foam.
4.
Close the lid. Make sure that the re-
lease button locks into position.
You can turn the selector of the
released quantity (
B
) between
position 1 (lowest quantity) and
position 4 or 6 (highest quantity).
7.
DAILY USE
1.
Open the water tap.
2.
Turn the programme knob until the
programme marker is aligned with a
programme on the control panel.
Make sure that the appliance is in
setting mode, refer to ’SETTING
AND STARTING A PROGRAMME’.
• If the salt indicator is on, fill the salt
container.
• If the rinse aid indicator is on, fill
the rinse aid dispenser.
3.
Load the baskets.
4.
Add the detergent.
• If you use the combi detergent
tablets, activate the Multitab op-
tion
5.
Set and start the correct programme
for the type of load and the degree
of soil.
60 www.aeg.com