Manual adjustment
Turn the water hardness dial to the posi-
tion 1 or 2.
Electronic adjustment
The appliance must be in setting
mode. Refer to ‘SETTING AND
STARTING A PROGRAMME’.
1.
Make sure that the programme mark-
er on the programme knob is aligned
with the off position.
2.
Press and hold
Multitab
. At the same
time turn the programme knob coun-
terclockwise until the programme
marker is aligned with the first pro-
gramme on the control panel.
3.
Release
Multitab
when the display
shows the setting of the water soften-
er.
• Example:
= level 5.
4.
Press
Multitab
again and again to
change the setting.
5.
To confirm the setting, turn the pro-
gramme knob until the programme
marker is aligned with the off posi-
tion.
6.2
Filling the salt container
1.
Turn the cap counterclockwise and
open the salt container.
2.
Put 1 litre of water in the salt con-
tainer (only for the first time).
3.
Fill the salt container with dishwash-
er salt.
4.
Remove the salt around the opening
of the salt container.
5.
Turn the cap clockwise to close the
salt container.
CAUTION!
Water and salt can come out
from the salt container when you
fill it. Risk of corrosion. To pre-
vent it, after you fill the salt con-
tainer, start a programme.
ENGLISH
59