background image

Programme 

1)

Water

(l)

Energy

(kWh)

Duration

(min)

P5

13 - 14

0.9 - 1.1

70 - 85

1) 

The pressure and the temperature of the water, the variations of the mains supply, the options and the

quantity of dishes can change the values.

5.2 

Information for test

institutes

For all the necessary information for test

performance, send an email to:

[email protected]

Write down the product number (PNC)

that is on the rating plate.

6. 

SETTINGS

6.1 

Programme selection

mode and user mode

When the appliance is in programme

selection mode it is possible to set a

programme and to enter the user mode.

In user mode, the following settings

can be changed:

• The level of the water softener

according to the water hardness.

• The activation or the deactivation of

the acoustic signal for end of

programme.

• The activation or deactivation of the

rinse aid empty notification.

• The activation or the deactivation of

AirDry.

These settings will be saved until you

change them again.

How to set the programme

selection mode

The appliance is in programme selection

mode when the display shows the

programme number 

P1

.

When you activate the appliance, usually

it is in programme selection mode.

However, if this does not happen, you

can set the programme selection mode

in the following way:
Press and hold 

RESET

 until the appliance

is in programme selection mode.

6.2 

The water softener

The water softener removes minerals

from the water supply, which would have

a detrimental effect on the washing

results and on the appliance.
The higher the content of these minerals,

the harder your water is. Water hardness

is measured in equivalent scales.
The water softener should be adjusted

according to the hardness of the water in

your area. Your local water authority can

advise you on the hardness of the water

in your area. It is important to set the

right level of the water softener to assure

good washing results.

Water hardness

German de-

grees (°dH)

French degrees

(°fH)

mmol/l

Clarke de-

grees

Water softener lev-

el

47 - 50

84 - 90

8.4 - 9.0

58 - 63

10

43 - 46

76 - 83

7.6 - 8.3

53 - 57

9

www.aeg.com

8

Summary of Contents for FSS52615Z

























Reviews: