background image

Problem

Possible cause and solution

Poor drying results.

• Tableware has been left for too long inside a closed

appliance.

• There is no rinse aid or the dosage of rinse aid is not

enough. Set the rinse aid dispenser to a higher level.

• Plastic items may need to be towel dried.
• For the best drying performance activate the option

XtraDry and set AirDry.

• We recommend to always use rinse aid, even in com-

bination with multi-tablets.

There are whitish streaks or
bluish layers on glasses and
dishes.

• The release quantity of rinse aid is too much. Adjust

the rinse aid level to a lower level.

• The quantity of detergent is too much.

There are stains and dry water
drops on glasses and dishes.

• The released quantity of rinse aid is not sufficient. Ad-

just the rinse aid level to a higher level.

• The quality of the rinse aid can be the cause.

The dishes are wet.

• For the best drying performance activate the option

XtraDry and set AirDry .

• The programme does not have a drying phase or has

a drying phase with low temperature.

• The rinse aid dispenser is empty.
• The quality of the rinse aid can be the cause.
• The quality of the multi-tablets can be the cause. Try a

different brand or activate the rinse aid dispenser and
use rinse aid and multi-tablets together.

The interior of the appliance is
wet.

• This is not a defect of the appliance. it is caused by

the humidity in the air that condenses on the walls.

Unusual foam during washing. • Use the detergent for dishwashers only.

• There is a leak in the rinse aid dispenser. Contact an

Authorised Service Centre.

Traces of rust on cutlery.

• There is too much salt in the water used for washing.

Refer to 

"The water softener"

.

• Silver and stainless steel cutlery were placed together.

Avoid to put silver and stainless steel items close to-
gether.

There are residues of deter-
gent in the dispenser at the
end of the programme.

• The detergent tablet got stuck in the dispenser and

therefore was not completely washed away by water.

• Water cannot wash away the detergent from the dis-

penser. Make sure that the spray arm is not blocked or
clogged.

• Make sure that items in the baskets do not impede the

lid of the detergent dispenser from opening.

Odours inside the appliance.

• Refer to 

"Internal cleaning"

.

ENGLISH

21

Summary of Contents for FSK63600P

























Reviews: