How to activate the acoustic
signal for the end of
programme
Make sure the appliance is in user mode.
1.
Press
.
• The indicators
,
,
and
are off.
• The indicator
still flashes.
• The display shows the current
setting.
–
= the acoustic signal is
deactivated.
–
= the acoustic signal is
activated.
2.
Press
to change the setting.
3.
Press the on/off button to confirm
the setting.
6.5
How to set the colour of
the TimeBeam
It is possible to change the colour of the
TimeBeam to match the colour of the
kitchen floor. There are several colours
available. The TimeBeam can also be
deactivated.
Make sure the appliance is in user mode.
1.
Press
.
• The indicators
,
,
and
are off.
• The indicator
still flashes.
• The display shows a number and
letter C. Each number refers to a
different colour.
–
= TimeBeam is
deactivated.
2.
Press
repeatedly to change the
colour.
3.
Press the on/off button to confirm
the setting.
6.6
AirDry
AirDry improves the drying results with
less energy consumption.
During the drying phase, the
door opens automatically
and remains ajar.
CAUTION!
Do not try to close the
appliance door within 2
minutes after automatic
opening. This can cause
damage to the appliance.
If, afterwards, the door is
closed for another 3
minutes, the running
programme ends.
AirDry is automatically activated with all
programmes excluding
(if
applicable).
To improve the drying performance refer
to the XtraDry option or activate AirDry.
CAUTION!
If children have access to the
appliance, it is advised to
deactivate AirDry as opening
the door may pose a danger.
How to deactivate AirDry
Make sure the appliance is in user mode.
1.
Press
.
• The indicators
,
,
and
are off.
• The indicator
still flashes.
• The display shows the current
setting.
–
= AirDry is deactivated.
–
= AirDry is activated.
2.
Press
to change the setting.
ENGLISH
11
