AEG FFB83730PW, User Manual

Page: 22 / 28

Problem Possible cause and solution
Poor drying results. • Tableware has been left for too long inside the closed
appliance.
• There is no rinse aid or the dosage of rinse aid is not
sufficient. Adjust the rinse aid level to a higher level.
• Plastic items may need to be towel dried.
• For the best drying performance, activate XtraDry and
AirDry.
• We recommend to always use rinse aid, even in com-
bination with multi-tablets.
There are whitish streaks or
bluish layers on glasses and
dishes. • The released quantity of rinse aid is too high. Adjust
the rinse aid level to a lower level.
• The quantity of detergent is too high.
There are stains and dry water
drops on glasses and dishes. • The released quantity of rinse aid is not sufficient. Ad-
just the rinse aid level to a higher level.
• The quality of the rinse aid can be the cause.
The dishes are wet. • For the best drying performance, activate XtraDry and
AirDry .
• The programme does not have a drying phase or has
a drying phase with low temperature.
• The rinse aid dispenser is empty.
• The quality of the rinse aid can be the cause.
• The quality of the multi-tablets can be the cause. Try a
different brand or activate the rinse aid dispenser and
use rinse aid and multi-tablets together.
The interior of the appliance is
wet. • This is not a defect of the appliance. Humid air con-
densates on the appliance walls.
Unusual foam during washing. • Use the detergent designed specifically for dishwash-
ers.
• There is a leak in the rinse aid dispenser. Contact an
Authorised Service Centre.
Traces of rust on cutlery. • There is too much salt in the water used for washing.
Refer to "The water softener" .
• Silver and stainless steel cutlery were placed together.
Avoid putting silver and stainless steel items close to-
gether.
There are residues of deter-
gent in the dispenser at the
end of the programme. • The detergent tablet got stuck in the dispenser and
was not completely washed away by water.
• Water cannot wash away the detergent from the dis-
penser. Make sure that the spray arm is not blocked or
clogged.
• Make sure that items in the baskets do not impede the
lid of the detergent dispenser from opening.
Odours inside the appliance. • Refer to
"Internal cleaning"
.
www.aeg.com 22