background image

Refer to "Before first use"

"Daily use", or "Hints and

tips" for other possible

causes.

Once you have checked the appliance,

deactivate and activate the appliance. If

the problem occurs again, contact an

Authorised Service Centre.
For alarm codes not described in the

table, contact an Authorised Service

Centre.

WARNING!

We do not recommend using

the appliance until the

problem has been

completely fixed. Unplug the

appliance and do not plug it

in again until you are certain

that it operates correctly.

12.1 The dishwashing and drying results are not satisfactory

Problem

Possible cause and solution

Poor washing results.

• Refer to "Daily use""Hints and tips" and the basket

loading leaflet.

• Use more intensive washing programme.

• Activate the SprayZone option to wash items with

heavy or stubborn soil.

• Activate the ExtraPower option to improve the washing

results of a selected programme.

• Clean spray arm jets and filter. Refer to "Care and

Cleaning".

Poor drying results.

• Tableware was left for too long inside the closed appli‐

ance. Activate the function AirDry to set the automatic

opening of the door and to improve the drying perform‐

ance.

• There is no rinse aid or the dosage of rinse aid is not

sufficient. Fill the rinse aid dispenser or set the dosage

of rinse aid to a higher level.

• The quality of the rinse aid can be the cause.

• Always use rinse aid, even with multi-tablets.

• Plastic items may need to be towel dried.

• The programme does not have the drying phase. Re‐

fer to "Programmes overview".

There are whitish streaks or

bluish layers on glasses and

dishes.

• The released quantity of rinse aid is too high. Adjust

the rinse aid dosage to a lower level.

• The quantity of detergent is too high.

There are stains and dry water

drops on glasses and dishes.

• The released quantity of rinse aid is not sufficient. Ad‐

just the rinse aid dosage to a higher level.

• The quality of the rinse aid can be the cause.

The interior of the appliance is

wet.

• This is not a defect of the appliance. Humidity conden‐

sates on the appliance walls.

ENGLISH

25

Summary of Contents for FEE84706PM





























Reviews: