Make sure that the appliance is in
programme selection mode.
• If the salt indicator is on, fill the
salt container.
• If the rinse aid indicator is on, fill
the rinse aid dispenser.
3.
Load the baskets.
4.
Add the detergent.
5.
Set and start the correct programme
for the type of load and the degree
of soil.
8.1
Using the detergent
30
20
A
B
D
C
20
30
B
A
D
C
1.
Press the release button (
B
) to open
the lid (
C
).
2.
Put the detergent, in powder or
tablets, in the compartment (
A
).
3.
If the programme has a prewash
phase, put a small quantity of
detergent in the compartment (
D
).
4.
Close the lid. Make sure that the
release button locks into position.
8.2
Using the multi-tablets
When you use tablets, that contain salt
and rinse aid, do not fill the salt container
and the rinse aid dispenser.
1.
Adjust the water softener to the
lowest level.
2.
Set the rinse aid dispenser to the
lowest position.
8.3
Setting and starting a
programme
Starting a programme
1.
Keep the appliance door ajar.
2.
Press the on/off button to activate
the appliance. Make sure that the
appliance is in programme selection
mode.
3.
Press the programme button
repeatedly until the indicator of the
programme you want to select
comes on.
4.
Close the appliance door to start the
programme.
Starting a programme with
delay start
1.
Set a programme.
2.
Press Delay to delay the start of the
programme of 3 hours.
• The indicator
comes on.
3.
Close the appliance door to start the
countdown.
When the countdown is completed, the
programme starts.
Opening the door while the
appliance operates
If you open the door while a programme
is running, the appliance stops. It may
affect the energy consumption and the
programme duration. When you close
the door, the appliance continues from
the point of interruption.
Cancelling the delay start
Press and hold the programme button
until the appliance is in programme
selection mode.
When you cancel the delay start, you
have to set the programme again.
www.aeg.com
48
