AEG Favorit CE, Instruction Book

Page: 24 / 81

24
Position- and connection instructions
Installation
Unpacking
Check the dishwasher for transport damage. Never connect a damaged
machine. In the case of damage, please contact your retailer.
Keep all packaging away from children.
Check that the following accessories are supplied:
– A funnel for filling salt (1)
– Elbow for discharge hose (2)
Protecting against freezing
If the dishwasher is placed in an environment where the temperature
sometimes fall below 0° C, there is a risk that the small amount of
water which remains inside the parts of the dishwasher will freeze
and damage it. To prevent this you should:
1. Turn off the water supply to the
dishwasher.
2. Remove the water inlet and
discharge hoses.
3. Make sure that there is coarse-
grained salt in the salt container
for the water softener.
The appliance is only to be used and
stored indoors at normal room tempe-
rature. The manufacture is not
responsible for any frost damage.
Positioning
The dishwasher is intended to be installed
on a kitchen sink, worktop or built-in.
To function properly, make sure that the
appliance is level. Its height can be
adjusted with the adjustable feets (5 mm
each). See the illustration for built-in
measurements.
1
2
english AEG Favorit CE 3-09-30 08.38 Sidan 24