AEG FAVORIT 88089, User Manual, Page: 12 / 40

Water hardness Water hardness setting
mg/l ppm mmol/l manually electronically
70 - 189 70 - 189 0.7 - 1.8 1 2
< 70 < 70 < 0.7 1
1
1)
1) No use of salt required.
You must set the water softener manually and electronically.
Manual adjustment
The appliance is set at the factory at position 2.
1. Remove the lower basket.
2. Turn the water hardness dial to position 1
or 2 (refer to the chart).
3. Put back the lower basket.
Electronic adjustment
The appliance is factory set at level 5.
1. Switch on the appliance. Make sure that the appliance is in setting mode.
2. Press and hold touchpad (4) and touchpad (5) at the same time until the indicators of
touchpads (3), (4), (5) and (6) flash.
3. Release touchpad (4) and touchpad (5).
4. Press touchpad (3),
• The indicators of touchpad (4), (5) and touchpad (6) go off.
• The indicator of touchpad (3) continues to flash.
• The acoustic signals sound.
• The display shows the setting of the water softener (example:
and you hear five
acoustic signals = level 5).
5. Press touchpad (3) one time to increase the water softener level by one step. Continue
to press touchpad (3) until the required water softener level is achieved.
6. Switch off the appliance to confirm.
12 Setting the water softener