11
The Options menu
•
Here go to the desired setting using the direction buttons (
or
).
•
For the option DELAY START see the section “Setting a delay start” for
the option 3 IN 1 see the section “Before using for the first time”
•
Use the OK/START button to switch from the menu item SETTINGS…
to the Settings sub-menu.
The Settings sub-menu
Here go to the desired setting using the direction buttons (
or
).
•
LANGUAGE
To set the language of the text line in the display; also see the section
“Resetting the language”.
•
WATER HARDNESS
To set the value for water hardness electronically (value range 1 to
10).
•
RINSE AID
When option 3 IN 1 is activated: Switch rinse-aid addition function
on or off.
When option 3 IN 1 is not activated: The rinse-aid addition function
is always switched on, even if OFF is selected for RINSE-AID.
•
SOUND VOLUME
To set the sound volume of the acoustic signals (value range 0 to 5);
at 0 the acoustic signals are switched off.
•
BRIGHTNESS
To set the brightness of the display (value range 1 to 10).
•
CONTRAST
To set the contrast of the display (value range 1 to 10).
Adjusting an option/setting
1.
Go to the option or setting you want to adjust.
2.
Press the OK/START button. The value currently selected will flash.
3.
Use the direction buttons (
or
)
to select the value required.
4.
Press the OK/START button. The newly selected value will be lit up con-
tinuously.
5.
You can use the direction buttons (
or
) to select another option or
setting.
3
By pressing OPTION a selected value is entered. The display will show
the first entry in the options/settings menus.
3
You can use the key combination RESET to cancel a settings procedure.