AEG Favorit 88025 VI, User Manual, Page: 33 / 40

CAUTION!
Make sure that the water couplings are tight to prevent water leakage.
Ensure that hoses are not crushed or kinked under
or behind the appliance.
Once connected the inlet hose to the water tap,
turn the tap on and check that there are no leaks.
Electrical connection
WARNING!
Safety standards require the appliance to be earthed.
Prior to using the appliance for the first time, ensure that the rated voltage and type of
supply on the rating plate match that of the supply where the appliance is to be installed.
The fuse rating is also to be found on the rating plate.
Always plug the mains plug onto a correctly installed approved socket.
Do not use multi-ways plugs, connectors and extension cables. This can constitute a fire
hazard through overheating.
If necessary, have the domestic wiring system socket replaced. If the mains cable has to be
replaced, contact your local Customer Care centre.
The mains plug must be accessible after the appliance has been installed.
Never unplug the appliance by pulling on the cable. Always pull the plug.
Test the appliance. Run a quick washing programme and ensure that the appliance fills
with water, washes and drains with no leaks.
The manufacturer accepts no liability for failure to observe the above safety precautions.
Environment concerns
The packaging materials are environmentally friendly and can be recycled. The plastic com -
ponents are identified by markings, e.g. >PE<, >PS<, etc. Discard the packaging materials
in the applicable container at the community waste disposal facilities.
WARNING!
To discard the appliance, follow the procedure:
• Pull the mains plug out of the socket.
• Cut off the mains cable and mains plug and discard them.
• Discard the door catch. This prevents children closing themselves inside the appliance
and endangering their lives.
Electrical connection 33