AEG Favorit 88025 VI, User Manual, Page: 19 / 40

Multitab function
The multitab function is for combi detergent tablets.
These tablets contain agents such as detergent, rinse aid and dishwasher salt. Some types
of tablets can contain other agents.
Do a check if these tablets are suitable for the local water hardness. Refer to the instructions
from the manufacturer.
The multitab function can be set with any program.
When you set the multitab function, it stays on until you deactivate it.
The multitab function automatically stops the rinse aid and water softener operation. The
rinse aid indicator light and salt indicator light are deactivated.
The program duration can increase if you use the multitab function.
Activate or deactivate the multitab function before the start of a washing program.
You cannot activate or deactivate the multitab function when the program operates. Cancel
the washing program, then set the program again.
To activate the multitab function:
• Press the multitab button. The multitab indicator light comes on.
To deactivate the multitab function:
• Press the multitab button. The multitab indicator light goes off.
Follow these steps if the drying results are not satisfactory:
1. Fill the rinse aid dispenser with rinse aid.
2. Activate the rinse aid dispenser.
3. Set the rinse aid dosage to position 2.
• You can only activate or deactivate the rinse aid dispenser when the multitab function
is activated.
To activate/deactivate the rinse aid dispenser:
1. Switch on the appliance.
2. Make sure that the appliance is in setting mode.
3. Press and hold function buttons B and C.
– The indicator lights for function buttons A, B, and C start to flash.
4. Press function button B.
– The indicator lights for function buttons A and C go off.
– The indicator light for function button B continues to flash.
– The digital display shows the setting.
Rinse aid dispenser deactivated
Rinse aid dispenser activated
5. Press function button B again.
– The digital display shows the new setting.
6. Switch off the appliance to save the operation.
Multitab function 19