manualshive.com logo in svg

AEG FAVORIT 84980 VI, Instruction Book, Page: 45 / 48

Share
Download
AEG FAVORIT 84980 VI Instruction Book Download Page 45

Installation instructions

45

Electrical connection

This appliance must be earthed.
The manufacturer declines any responsibility should this safety
measure not be observed.

If the plug that is fitted to your appliance is not suitable for the
socket, it must be cut off and the appropriate plug fitted.

Important

The wires on the mains lead are coloured in accordance with the
following code:

Green and Yellow

- Earth

Blue

- Neutral

Brown

- Live

If you fit your own plug, the colours of the wires in the mains lead of
your appliance may not correspond with the markings identifying the
terminals in your plug.

Proceed as follows:
1.

Connect the Green and Yellow (earth) wire to the terminal in the 
plug which is marked with the letter "E" or the earth symbol 

or 

coloured green and yellow.

2.

Connect the Blue (neutral) wire to the terminal in the plug which is 
marked with the letter "N" or coloured black.

3.

Connect the Brown (live) wire to the terminal in the plug which is 
marked with the letter "L" or coloured red.

13

A

CE04

E

N

L

152955 36/0en  11-04-2005  12:25  Pagina 45

Summary of Contents for FAVORIT 84980 VI

















































Reviews:

No comments