manualshive.com logo in svg

AEG FAVORIT 84980 VI, Instruction Book, Page: 19 / 48

Share
Download
AEG FAVORIT 84980 VI Instruction Book Download Page 19

Operating instructions

19

For washing in the dishwasher the following cutlery/dishes

are not suitable:

• Cutlery with wooden, horn, china or 

mother-of-pearl handles

• Plastic items that are not heat resistant

• Older cutlery with glued parts that is not 

temperature resistant

• Bonded cutlery items or dishes

• Pewter or copper items

• Lead crystal glass

• Steel items subject to rusting

• Wooden platters

• Items made from synthetic fibres

• Only wash stoneware in the dishwasher if it 

is specifically marked as being dishwasher-
safe by the manufacturer.

• Glazed patterns may fade if machine 

washed frequently.

• Silver and aluminium parts have a tendency 

to discolour during washing. Residues, e.g. 
egg white, egg yolk and mustard often 
cause discolouring and staining on silver.
Therefore always clean left-overs from silver 
immediately, if it is not to be washed 
straight after use.

• Some types of glass can become dull after a 

large number of washes.

are of limited suitability:

152955 36/0en  11-04-2005  12:25  Pagina 19

Summary of Contents for FAVORIT 84980 VI

















































Reviews:

No comments