1. Press and hold at the same time, function buttons (B) and (C) until all the programme
button indicators come on.
2. Release function buttons (B) and (C). The set programme is cancelled.
Make sure that there is detergent in the detergent dispenser before you start a new wash
-
ing programme.
End of the washing programme
When the washing programme is completed, an intermittent acoustic signal sounds.
1. Open the appliance door, the display shows a zero.
2. Deactivate the appliance.
For better drying results, keep the appliance door ajar for some minutes.
• If you do not switch off the appliance, after three minutes from the end of the washing
programme:
– all indicator lights go off,
– the display shows one horizontal bar,
This helps to decrease energy consumption.
Press one of the buttons (not the on/off button), the display and the indicator lights come
on again.
Remove the items from the baskets
• Let the dishes become cold before you remove them from the appliance. Hot dishes can
be easily damaged.
• First remove the items from the lower basket, then from the upper basket.
• There can be water on the sides and on the door of the appliance. Stainless steel be
-
comes cool more quickly than the dishes.
CARE AND CLEANING
To remove and clean the filters
Dirty filters decrease the washing results.
The appliance has two filters:
• Coarse filter (1).
• Fine filter (2).
Make a check of the coarse filter after each wash
-
ing programme.
Make a check of the fine filter at regular intervals.
Removing and cleaning the coarse filter (1)
1. Remove the coarse filter.
2. Clean the coarse filter fully under running wa
-
ter.
3. Put in the coarse filter in position.
20
Care and cleaning