manualshive.com logo in svg

AEG FAVORIT 65050 VI, User Instructions, Page: 5 / 48

Share
Download
AEG FAVORIT 65050 VI User Instructions Download Page 5

Operating Instructions

5

OPERATING INSTRUCTIONS

1 

Safety Instructions

The safety aspects of AEG electrical appliances comply with accepted 
technical standards and the German Appliance Safety Law. Neverthe-
less, as a manufacturer we consider it our obligation to make you 
aware of the following safety information:

Installation, Connection and Placing into Operation

• The dishwasher may only be transported upright.

• Check the dishwasher for transport damage. Do not in any circum-

stances connect an appliance that is damaged. In the case of damage, 
please contact your retailer.

• Before installing the appliance, ensure that the nominal voltage and 

type of supply on the rating plate match that of the supply where the 
appliance is to be installed. The fuse rating is also to be found on the 
rating plate.

• For information on how to correctly install and connect up your dish-

washer, please read the “Installation“ section. Adaptors / connectors 
and extension cables must not be used.

Child Safety

• This appliance is designed to be operated by adults. Children should 

not be allowed to tamper with the controls or play with the product.

• Keep all packaging away from children.

• Keep all detergents in a safe place out of children’s reach.

• The water in your dishwasher is not suitable for drinking. If there are 

still remnants of detergent in the appliance, there is a risk of burns!

• When disposing of an old appliance, cut off the power supply cable 

and remove any door catches, to prevent young children being 
trapped inside.

General Safety

• Repairs to the dishwasher are only to be carried out by qualified serv-

ice engineers. Improper repairs can give rise to significant hazards for 
the user. If your appliance needs repairing, please contact your local 
AEG Service Force Centre.

Summary of Contents for FAVORIT 65050 VI

















































Reviews:

No comments