9
Prior to Using for the First Time
3
If you wish to use 3 in 1 detergent:
– First read the section “Using 3in1 detergents”.
– Do not fill up with special salt or rinse aid.
If you do not use 3in1 detergent, before using for the first time
1.
Set the water softener
2.
Fill up with dishwasher salt
3.
Fill up with rinse aid
Setting the Water Softener
3
To avoid scale deposits on the dishes and in the dishwasher, the dishes
must be washed with soft water, i.e. water with a low lime content. The
water softener must be set according to the table to the water hard-
ness in the area where you live. Your local water company will be able
to give you information about the water hardness in your area.
1.
Press the ON/OFF button.
3
If the only LED indicator illuminated belongs to a programme button,
this means that this dishwashing cycle has been activated. The dish-
washing cycle must be deselected:
Press function buttons
2
and
3
simultaneously for approx. 2 seconds.
Two lines are displayed in the multi-function display.
2.
Press function buttons
2
and
3
simultaneously and keep them pressed.
The LED indicators for function buttons 1 to 3 will flash.
3.
Press function button
1
.
The LED indicator for function button
1
will flash.
The multi-display will indicate the hardness setting.
4.
Pressing function button
1
increases the hardness setting by 1.
(Exception: hardness setting 1 follows hardness setting 10).