manualshive.com logo in svg

AEG FAVORIT 64570 Vi, User Information, Page: 41 / 52

Share
Download
AEG FAVORIT 64570 Vi User Information Download Page 41

41

Water Supply Connection

•

The dishwasher must be plumbed into a cold water supply.

•

The water pressure must be within the limits given in the technical 
specifications. Your local Water Authority will advise you on the aver-
age mains pressure in your area.

•

A shut-off device with a ¾" connection must be provided on site.

•

The inlet hose has a filter to remove any impurities from the water 
supply and a rubber seal. When fitting ensure that the filter and seal 
are correctly positioned.

1

No water must escape from the fitting after the shut-off device 
has been opened.

Water Outlet Hose Connection

•

Ensure the drain hose is not bent or squashed as the could prevent or 
slow down the discharge of water. 

•

The  outlet hose should be connected to a water outlet provided in a 
neighboring cupboard (not directly behind the unit).

•

The dishwasher is fitted with a device to prevent the back flow of wa-
ter, which allows the installation height of the unit to be above the 
outlet height.

•

The highest point of the drain hose should never exceed the unit 
height.

Summary of Contents for FAVORIT 64570 Vi





















































Reviews:

No comments